Automation with insertLoad

For the machine types, S31 and S33  with center distances 400 mm, 650 mm and 1000 mm, an automation solution based on a robot cell is offered. The loading system is suitable for chuck parts up to 100 mm (3.94”) and shaft parts up to 300 mm (11.8”) and a part diameter of max. 100 mm (3.94”) and is thus particularly suitable for small to medium-sized workpieces. The parts are supplied via a standardized drawer system. The enclosure for the basic module, which is provided with a loading hatch as standard, has been adapted to match the machine



  • Standard automation for small to medium-sized workpieces
  • Cutting-edge set-up wizard for quick and easy set-up
  • Quick set-up and resetting in under 15 minutes
  • Very simple workpiece supply
  • No robot programming knowledge required
  • Short delivery time thanks to standardization
  • Expandable for your future requirements

Technical specification

Maschine types                        S31 and S33 with distance between centers
                                                   400 mm (15.75"), 650 mm (25.6"), 1000 mm (39.4")


Spectrum of parts                     Shaft and chuck parts


Autonomy                                  Two part trays available, autonomy varies
                                                    depending on part size


Workpiece dimensions             Part length: max. 100 mm (3.94") (chuck parts),                                                                                max. 300 mm (11.81") (shaft parts)

                                                    Part diameter: max. Ø 100 mm (3.94")

                                                    Gripping diameter: min.  Ø 6  (0.24") -  max. 70 mm (2.75")

                                                    Part weight: max. 1.5 kg (3.3 lbs) with dual gripper

                                                    Part weight: max. 5 kg (11 lbs) with single gripper


Workpiece loading time           8 seconds (with dual gripper)

                                                    18 seconds (with single gripper)

                                                    Re-provisioning time: 11 seconds


Control system                           Operation via C.O.R.E. panel and
                                                     Siemens 9" screen as a handheld
                                                     control unit


Construction and equipment     Basic frame with enclosure and set-up door,
                                                      Fanuc robot type LR Mate 200iD
                                                      and Fanuc linear axis as well as two
                                                      individually loadable pallets.
                                                      With separate SPC / NOK deposit.


Installation space approx.           Width: 1500 mm (59"), length: 1400 mm (55")



Fyler insertLoad

pdf, 762 KB