insertLoad

For the machine types, S31 and S33  with center distances 400 mm, 650 mm and 1000 mm, an automation solution based on a robot cell is offered. The loading system is suitable for chuck parts up to 100 mm (3.94”) and shaft parts up to 300 mm (11.8”) and a part diameter of max. 100 mm (3.94”) and is thus particularly suitable for small to medium-sized workpieces. The parts are supplied via a standardized drawer system. The enclosure for the basic module, which is provided with a loading hatch as standard, has been adapted to match the machine

Maschine types                        S31 and S33 with distance between centers
                                                   400 mm (15.75"), 650 mm (25.6"), 1000 mm (39.4")

__________________________________________________________________________

Spectrum of parts                     Shaft and chuck parts

___________________________________________________________________________

Autonomy                                  Two part trays available, autonomy varies
                                                    depending on part size

___________________________________________________________________________

Workpiece dimensions             Part length: max. 100 mm (3.94") (chuck parts),                                                                                max. 300 mm (11.81") (shaft parts)

                                                    Part diameter: max. Ø 100 mm (3.94")

                                                    Gripping diameter: min.  Ø 6  (0.24") -  max. 70 mm (2.75")

                                                    Part weight: max. 1.5 kg (3.3 lbs) with dual gripper

                                                    Part weight: max. 5 kg (11 lbs) with single gripper

___________________________________________________________________________

Workpiece loading time           8 seconds (with dual gripper)

                                                    18 seconds (with single gripper)

                                                    Re-provisioning time: 11 seconds

___________________________________________________________________________

Control system                           Operation via C.O.R.E. panel and
                                                     Siemens 9" screen as a handheld
                                                     control unit

___________________________________________________________________________

Construction and equipment     Basic frame with enclosure and set-up door,
                                                      Fanuc robot type LR Mate 200iD
                                                      and Fanuc linear axis as well as two
                                                      individually loadable pallets.
                                                      With separate SPC / NOK deposit.

___________________________________________________________________________

Installation space approx.           Width: 1500 mm (59"), length: 1400 mm (55")